goldelico

by goldelico · · · · 1 subscribers

Youtube uploads by goldelico

The new letux-4.13-rc2 kernel release finally supports the GTA04 camera (ov9655) again. Driver is still work in progress, hence image quality is not optimal. Currently we only have SXGA resolution with 15fps. VGA would be 30fps but shows a green screen only. The delay you can see comes from mplayer which rotates the image by 90 degrees (orientation of the camera in the case). At the end of the video there was a battery connector glitch (it was without plastics case) and the device did reboot.

more...


Tags: mobile, gta-04, openphoenux, openmoko

Older Episodes

GTA04A5 GPS Demo March 20, 2017
This shows running the GPS demo on a GTA04A5 with LXDE/FoxtrotGPS.
This video shows a wireless Qi compatible charger for the GTA01/02/04 devices. It uses a coil glued to the outside of the battery cover so that the battery stays uninfluenced and does not influence charging. The converter chip is connected through the USB socket so that the charger + coil ...
3 PCBs out of 4 in a panel are working. One is shown to boot with display in this video.
GTA04A5 First Production Sept. 24, 2016
Yesterday, Production of the new GTA04A5 boards has started. Here is a short video showing how the bottom side (the one with big space for the LCD panel and just a handful of components) is done. For the GTA04 please refer to http://www.gta04.org
using an OMAP5 with 1 GB RAM and Linux. Just to make one LED blink :) Well, this is the first prototype of the CPU board for the Pyra-Handheld.com
using an OMAP5 with 1 GB RAM and Linux. Just to make one LED blink :) Well, this is the first prototype of the CPU board for the Pyra-Handheld.com
The Pyra Prototype is powered from a Notebook, is running the MIPI Panel (w/o rotation) and the HDMI cable is connected to a beamer. The beamer shows a (distorted) copy of the panel image. The reason why it is distorted is that both, MIPI and HDMI are running from the ...
The Pyra Prototype is powered from a Notebook, is running the MIPI Panel (w/o rotation) and the HDMI cable is connected to a beamer. The beamer shows a (distorted) copy of the panel image. The reason why it is distorted is that both, MIPI and HDMI are running from the ...
This video shows a 3D rendering of the PCB design we are currently working on. It already has the (almost) right contour, and if you know where to look you can identify the camera module, push buttons, OTG socket, headset jack, speakers, UMTS module. It is made by some python ...
This video shows a 3D rendering of the PCB design we are currently working on. It already has the (almost) right contour, and if you know where to look you can identify the camera module, push buttons, OTG socket, headset jack, speakers, UMTS module. It is made by some python ...
Neo900 - how to squeeze a GTA04 motherboard (1GHz DM3730 OMAP3 CPU + 3G) into an existing N900 case. This video illustrates the idea that the www.neo900.org project wants to come to real life.
Neo900 - how to squeeze a GTA04 motherboard (1GHz DM3730 OMAP3 CPU + 3G) into an existing N900 case. This video illustrates the idea that the www.neo900.org project wants to come to real life.
Finally, here is the Linux 3.7 driver for the OV9655 connected to a DM3730 (OMAP3) working. The sequence shows camera startup (green/black and AGC) pointing to a lamp on the ceiling of the lab, then we place a mirror in front of it so that you see the GTA04 in ...
Finally, here is the Linux 3.7 driver for the OV9655 connected to a DM3730 (OMAP3) working. The sequence shows camera startup (green/black and AGC) pointing to a lamp on the ceiling of the lab, then we place a mirror in front of it so that you see the GTA04 in ...
This short video shows the sgx_clipblit_test and the sgx_render_flip_test
This short video shows the sgx_clipblit_test and the sgx_render_flip_test
Impressions from running an OpenPhoenux stand at FOSDEM 2013 in Brussels, Belgium. Shows how the spirit of the community is, how we arrived, built up the stand and had many fruitful discussions with visitors of any age. We even found some spare minutes to attend very selected presentations (e.g. ARM ...
Impressions from running an OpenPhoenux stand at FOSDEM 2013 in Brussels, Belgium. Shows how the spirit of the community is, how we arrived, built up the stand and had many fruitful discussions with visitors of any age. We even found some spare minutes to attend very selected presentations (e.g. ARM ...
Letux 7004 Prototype Oct. 9, 2012
The prototype of a free and open software friendly 7 inch tablet based on the GTA04 motherboard.